Lifa Air creates products that keep ventilation systems, exhaust ducts, HVAC and air condition units clean. Our products are proven to work, as you can see from Lifa Air’s most recent projects.
| Microbes on Surfaces | Dust Level | Bacteria Level on Surfaces |
| 99 % | 9.99 g/m² | 9.9 % |
Lifa Air’s brushes are easy to use for round and rectangular duct systems. Our machines come in various sizes to fit the strength and length you need. For those that want complete control over their cleaning apparatuses, these machines come with accessories such as different brushes and attachable cameras so you can observe your cleaning.
(residental houses,
office, etc)
Hand Driller Shafts
(residental houses,
office, etc)
SpecialCleaner 20
(residental houses,
office, etc)
CombiCleaner 15
(Offices,schools
hospitals,etc)
SpecialCleaner 25 Multi
(Industrial building)
CombiCleaner 40
(Industrial building)
Hydmaster 40
for ducts measuring 200-1200mm; brush speed 0-760 rpm
A multi-use brushing machine for all your ventilation cleaning needs, CombiCleaner 40 has a 40-meter cleaning axis, chemical nozzle for spray cleaning, a wheel mounted for mobility and a hand control for operating brush rotation.
It is designed to clean 75 meters of duct in both directions from one access hatch. Chemical nozzles can be attached, which enable direct spray application of cleaning, disinfecting and duct-coating substances. The CombiCleaner 40 requires a compressor for pressured air, with an efficiency of 10-7 bar and an air volume of 300-600 l/m.
for ducts measuring 315-800 mm; brush speed 300-570 rpm
The SpecialCleaner 25 Multi is truly an all-purpose cleaner specifically designed for offices, schools, and hospitals. The SpecialCleaner 25 Multi fits ducts that are 315-800mm with a brush rotation of 300-570 rpm. You can easily change the rotation of the brush using the foot pedal that comes with the cleaner.
Perfect use for offices, schools, and hospitals, the SpecialCleaner 25 Multi is a multifunctional machine built for all-purpose cleaning. This electric-powered duct cleaner can be used for the following.
for ducts measuring 200-1200mm; rotating speed of 0-800 rpm
The Hydmaster is the most powerful HVAC electrical brushing machine designed for demanding cleaning practices within industrial sized buildings such as factories, power plants, and mills. The Lifa Hydmaster performs the most strenuous tasks using hydraulic power. The Hydmaster brush speeds past the competition with a rotating speed of 0-800 r/min. It operates on monophase voltage, which means the Hydmaster is quieter than other pneumatic cleaning machines. The Lifa Hydmaster cleans 75 meters of duct when extended in both directions from one access hatch and its oversize brushes can rotate in narrow ducts.
The machine uses environmentally friendly, synthetic and biodegradable oil. The hydraulic tubes have a laminated, durable nylon fiber interior making the Hydmaster the most durable brushing machine on the market.
For easy operation on small duct cleaning projects
Hand driller shafts are important tools for anyone conducting duct-cleaning practices. Conventional brush cleaning machines end up being too large for tiny ducts. Those ducts then end up harvesting air born containments that infects the air you breathe. Hand driller shafts are ideal for small duct cleaning purposes and Lifa’s high quality thoroughly tested equipment will make sure that your air is safe and secure.
for small ducts measuring 100-600 mm; 500rpm
Have a small duct? The SpecialCleaner 20 is designed to clean tight spaces. Pneumatic operation by foot control mechanism allows direction of rotation to be changed helping you avoid obstacles. Its 20-metre range-cleaning axis permits cleaning 35m of duct when extended.
The SpecialCleaner 20 is an electric ventilation duct-cleaning machine with a rotation speed of 550 rpm. It is designed to clean the inside surfaces of small ducts between 100-600 mm, although 400-600 mm ducts can only be vertical flues.
for ducts measuring 100 – 600mm; brush speed 0-500 rpm
Built for grease duct cleaning, the CombiCleaner 15 is the perfect fit for cleaning small kitchen exhaust ducts or cramped spaces in residential, or office buildings. CombiCleaner 15 is designed with a pneumatic motor for brush rotation that provides a fast and deep cleaning for your ducts.
Based on the same high quality components used in other Lifa machines; proven functionality and durability.
Our negative pressure vacuum and air cleaner units are designed for construction, renovation and restoration work. These machines are made to handle dry air contaminants such as asbestos, mold, quartz, powder and wood dust.
Lifa Air’s negative pressure vacuum and air cleaner units are designed for construction, renovation and restoration ventilation cleaning. The machines are suitable for handling dry air containing asbestos, quartz, hardwood, mineral wool, microorganisms, mold and fungus spores. Our air cleaners are portable and quiet, allowing them to be used in small and cramped spaces.
Classic Vacuum Units
AirClean 7000
Classic Vacuum Units
AirClean 600
Classic Vacuum Units
AirClean 3500
For Removing Hazardous
Airborne Agents
HepaClean 2500
For Removing Hazardous
Airborne Agents
HepaClean 1100
For Removing Hazardous
Airborne Agents
HepaClean 4000
Max airflow: 2800 m3/h
Lifa Air HepaClean 2500 is ideal for removing gaseous compounds. It features an airflow of 2800m3/h.
Max airflow 6950 m3/h; Static pressure 2200 Pa
The AirClean 7000 is designed for handling large industrial buildings such as factories, power plants and mills. Equipped for cleaning and vacuuming anything that comes its way, the AirClean 7000 can handle dry air containing asbestos, mold, construction, quartz, powder and wood dust. It’s primarily used for creating negative pressure in ventilation ducts. This vacuum unit creates a large air volume and airflow of 18-22m/s, which ensures the total removal of brushed dirt.
Max airflow: 1159 m3/h; Static pressure: 750 Pa
Providing a maximum airflow from 300-1150m3/h, the HepaClean 1100 is ideal for air cleaning during small jobs. The HepaClean 1100 is designed for construction, renovation or restoration work and ventilation cleaning. This machines is known to be a long lasting, highly efficient, and easy to use.
Max airflow: 3850 m3/h
The HepaClean 4000 is equipped with a pressure-difference meter, which indicates the condition of the filter and the need to change it. It is ideal for cleaning and vacuuming dry air containing asbestos, mold, construction, quartz, powder and wood dust.
Max airflow of 800 m3/h; Static pressure 600 Pa
The AirClean 600 is a compact and extremely portable negative air pressure vacuum unit. Made for securing a dust-free construction work area, the AirClean 600 has airflow of 800 m3/h (470 cfm) without a filter attached. Attaching a G4 and F5 suction hose filter, creates airflow of 600 m3/h (353 cfm). However, with the HEPA filter attached the maximum airflow that can be achieved with the AirClean 600 is 300 m3/h.
Max airflow of 3600 m3/h; Static pressure 1350 Pa
With airflow of 3600 m3/h, the AirClean 3500 unit cleans ventilation systems and general renovation area. It can also be used as an air mover in water damage, mold and microbial removal restoration work. It can also be used as an air scrubber by equipping it with a gas filter. A portable unit built for heavy-duty professional use.
|
|
|
Copyright © 2016 LIFAair. All right reserved. Site by Ventmere
